I. Preparation
1. Determine the Installation Site: The installation site should be flat and clean, free of puddles, oil, and other contaminants to ensure smooth hoist operation.
2. Determine the Power Source: Select a power source that meets the requirements based on the rated voltage of the electric hoist. Ensure that the power source is stable and will not be affected by voltage fluctuations.
3. Inspect the Equipment: Before installation, check that all accessories are complete and all connections are secure to ensure proper operation.
II. Installation Steps
1. Secure the
electric hoist in the designated location and install the base screws. Tighten the screws to ensure a secure fit.
2. Install the hook and check that the hook connections are secure. Ensure that they are not loose during lifting to avoid safety hazards.
3. Connect the Power Supply: Connect the power cord to the power port on the electric hoist. Ensure that the power cord is secure to prevent loose power from affecting the hoist's operation.
4. Hoist Debugging: After powering on, check the hoist for normal operation and any unusual sounds. Debug the hoist to ensure proper operation.
III. Safety Precautions
1. During use, ensure the load is securely placed before lifting. After removing the load, lower the hook to prevent it from spinning freely and causing safety accidents.
2. During use, frequently check the hoist's accessories, connectors, and power cord for loose or broken parts, and repair them promptly.
3. Overloading is prohibited. Operate in accordance with standards to avoid equipment damage or safety accidents caused by overloading.
[Conclusion]
The
installation of an electric hoist is crucial to its proper operation. This article briefly describes the installation requirements for a 3-ton electric hoist, including site requirements, power supply requirements, and installation steps. We hope this will help you install your electric hoist and ensure its proper and safe operation.
